![]() ![]() You should look into that for the long-term. Overall, it's best to pull control signals off the mother board and run fan splitters to pull power thru SATA type power cables directly from the peripheral ports on the PSU. Best case scenario would be a 4-wire PWM-controlled fan. You might need to plug at least one radiator fan into into CPU FAN which should stop the error message for now. Most pumps are Pulse Width Modulation controlled (double check your pump manual), so select PWM mode of operation for the W_Pump+ If you plug in only the sata/molex cable, the pump will run a constant 100%. If the pump has 2 leads, connect the small 2-wire lead into the W_Pump connector and connect the other lead to a sata cable connector or molex connector off the PSU. If you have only 1 lead from the pump, plug it into the W_Pump+ motherboard connector. Your pump may have 1 wire lead (4 wires in lead) or 2 leads (one small one with 2 wires and one with a larger connector with 2, 3 or 4 wires). From here, it looks like you should plug your pump into W_Pump+. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |